Shop Resin

ReMARKable Epoxy Resin Safety

Creativity starts with knowing your materials.

ReMARKable Premium Epoxy Resin for Art is a two-part system consisting of Part A Resin and Part B Hardener. Before beginning any project, read the labels on both components completely and follow all warnings, precautions and instructions.

The information below summarizes the manufacturer-approved ReMARKable Resin labels. Always keep the original labeled containers available while working.

Before You Begin

Prepare your workspace and protective equipment before opening either container.

Keep ReMARKable Resin out of reach of children. Do not eat, drink or smoke while handling the product. Avoid releasing either component into the environment.

Part A and Part B have different hazard classifications. Never assume that precautions listed for one component apply identically to the other. Read both labels before use.

Personal Protective Equipment

When handling Part A Resin, the approved label directs users to wear protective gloves and eye protection.

When handling Part B Hardener, wear protective gloves, protective clothing, eye protection and face protection.

Part A should not be inhaled as fumes, vapors or mists. Wash thoroughly after handling either component and remove contaminated clothing as directed on the product label.

Part A Resin Safety

Part A carries the following manufacturer-approved warnings:

WARNING: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life. Toxic to aquatic life with long-lasting effects.

Do not breathe fumes, vapors or mists. Avoid skin and eye contact and avoid release to the environment.

Part A also carries a California Proposition 65 warning concerning exposure to Epichlorohydrin, a chemical known to the State of California to cause cancer and/or reproductive harm.

Part B Hardener Safety

Part B carries the following manufacturer-approved warnings:

DANGER: Harmful if swallowed. Harmful in contact with skin. Causes skin irritation. Causes serious eye damage. Suspected of damaging fertility or the unborn child. Toxic to aquatic life. Toxic to aquatic life with long-lasting effects.

Obtain, read and follow all safety instructions before use. Avoid skin and eye contact and avoid release to the environment.

If ReMARKable Resin Gets on Your Skin

For Part A, wash the affected area with plenty of soap and water. If skin irritation or a rash occurs, get medical help.

For Part B, wash with plenty of water. If skin irritation or a rash occurs, get medical help.

Remove contaminated clothing and wash it before reuse as directed by the applicable product label.

If ReMARKable Resin Gets in Your Eyes

For Part A, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing. If eye irritation persists, get medical help.

For Part B, immediately rinse with water for several minutes. Remove contact lenses if present and easy to do, continue rinsing and get medical help.

Part B is classified as causing serious eye damage, so treat eye exposure seriously.

If Part B Is Swallowed

Part B is harmful if swallowed.

If swallowed, get medical help and rinse the mouth as directed by the approved label.

Mixing and Handling

Follow the supplied directions rather than improvising the mixing process.

Warm the unopened Part A and Part B containers in hot water for approximately 10 minutes.

Measure equal amounts of Part A and Part B by volume into a clean mixing container.

Using a clean mixing stick, preferably silicone, gently mix for 3 minutes. Avoid whipping air into the mixture.

Immediately pour or drizzle the mixed resin onto the surface and spread evenly using a silicone spreading tool.

ReMARKable Resin has an approximate 45-minute pot life and 18–24-hour dry time, based on an ambient temperature of 70°F (21°C).

Storage

Store Part A and Part B:

  • Indoors
  • At 50–90°F
  • Away from sunlight
  • In their original containers

Part B should also be stored locked up as directed by its label.

Always keep the original labels attached to the containers.

Spills and Environmental Protection

Both Part A and Part B are labeled as toxic to aquatic life with long-lasting effects.

Avoid release to the environment and collect spillage. Do not intentionally pour unused resin, hardener or mixed material into drains, waterways, soil or the environment.

Dispose of contents and containers in accordance with applicable local, regional and national regulations.

California Proposition 65

The Part A Resin label states:

WARNING: This product can expose you to chemicals including Epichlorohydrin, which is known to the State of California to cause cancer and/or reproductive harm.

Additional information about California Proposition 65 is available from the State of California.

ASTM D-4236

ReMARKable Resin Part A and Part B labels state that the products conform to ASTM D-4236, the labeling standard associated with chronic health hazards in art materials.

Conformity with ASTM D-4236 should not be interpreted as permission to disregard the warnings or protective measures on the product labels.

Have a Safety Question?

If you have questions about ReMARKable Resin before beginning your project, contact us.

ReMARKable Resin | 360° Coatings LLC
6077 Coffee Rd, #4-171
Bakersfield, CA 93308
(800) 936-2159

KEEP OUT OF REACH OF CHILDREN. READ AND FOLLOW ALL PRODUCT LABELS AND SUPPLIED INSTRUCTIONS BEFORE USE.